Virtual Machine integration

[qwertyqwq]

Hello,

I successfully installed RapidSCADA on a VirtualBox Raspberry Pi 64-bit operating system. I can currently see all the .log files in the /var/log/scada directory. I followed all the steps in the YouTube video you shared (Rapid SCADA 6 – Lesson 16: Deployment Profiles) and completed them correctly.

However, when I go to Server → Logs in the Linux profile section, I encounter the following error message:
“Client is not logged in. Try again later / Invalid username or password.”

The log created in /var/log/scada/ScadaAgent/Log on the virtual machine is as follows:

2025-11-28 07:34:14 [raspberry][root][ACT] Agent 6.2.0.1 started
2025-11-28 07:34:15 [raspberry][root][ACT] Start logic processing
2025-11-28 07:34:15 [raspberry][root][ACT] Start listener on port 10002
2025-11-28 07:53:18 [raspberry][root][ACT] Session with ID 4147105668070683864 created
2025-11-28 07:53:18 [raspberry][root][ACT] Client 192.168.1.111 connected
2025-11-28 07:53:18 [raspberry][root][ERR] Authentication failed for user ScadaAdmin: Invalid username or password
2025-11-28 07:53:40 [raspberry][root][ACT] Session with ID -7889120548295840410 created
2025-11-28 07:53:40 [raspberry][root][ACT] Client 192.168.1.111 connected
2025-11-28 07:53:40 [raspberry][root][ERR] Authentication failed for user ScadaAdmin: Invalid username or password
2025-11-28 07:54:23 [raspberry][root][ACT] Client 192.168.1.111 disconnected
2025-11-28 07:54:43 [raspberry][root][ACT] Client 192.168.1.111 disconnected

On my Windows host machine, the web server address I prepared is http://127.0.0.1:10008/View

. On this page, I collect some displays from Modbus RTU inputs. My main goal is to transfer this project to the Raspberry Pi and keep it running continuously.

Below I shared the screenshots related to the error.

In the “Linux Profile” I created, the username is ScadaAdmin and the password is admin. I also copied the secret key exactly as shown in the video. Could you tell me what might be causing this error?

[qwertyqwq]

image 1
https://ibb.co/vCZL6XMy

image 2
https://ibb.co/LXbj17Wm

[Mikhail]

Hi,
Note that the Agent service uses user/password from its configuration file.
Try changing the password to the default scada
If it works, set any password you need, update it in the Agent’s configuration, and restart Agent.

[Author]

Posts